Kirin 9000S Performance Test 2.0: Surprise After the Launch

Hello everyone, after the Huawei press conference, we welcomed the 121 version of the Hongmeng 4.0 system

Hello everyone, after the Huawei press conference, we welcomed the 121 version of the Hongmeng 4.0 system. We also retested the performance of the Kirin 9000S based on Mate60Pro+in this version, which can be said to be full of surprises. Let's take a look together.

It should be noted that this test was conducted at a room temperature of 25 degrees Celsius, with the body set to factory settings and high-performance mode enabled. The data used for comparison comes from the early firmware versions of Huawei Mate60Pro.

Firstly, the popular version of Antu Rabbit V10 is still not compatible, and the GPU part is still not available. Therefore, we will skip this section and directly enter the CPU testing of GeekBench6.

After actual measurement, Huawei Mate60Pro+scored 1303 on a single core and 4111 on multiple cores. It can be seen that the single core score has not changed at all, but the multi core score has increased by about 500 points. We can also see that GeekBench6 successfully identified 12 threads, which is also the source of the increase in multi core score.

Subsequently, we conducted a 3DMarkWildLifeEXTREME test that reflected the performance of the GPU, and the score of Mate60Pro+was 1529, with no significant change.

In the 3DMark pressure cycle test that reflects heat dissipation performance, Mate60Pro+achieved 1535 points for the best cycle, 1443 points for the lowest cycle, and 94% stability, with a significant improvement.

After the 3DMark pressure cycling test, the rear cover temperature of the Mate60Pro+body reached a maximum of 47.8 degrees Celsius with an average of 42.2 degrees Celsius.

In terms of games, Genshin Impact finally adapted to Huawei Mate 60 series, and we also carried out the actual measurement. The actual measurement condition is still the classic running map test of Liyue Port, with extremely high image quality+60 frames. In high-performance mode, with the super frame stabilization function turned off, the average frame rate of Huawei Mate60Pro+'s 15 minute run graph is 55.7 frames.

We also tested the crash iron, which may be due to the lack of optimization, and the performance is still not very good. In the central scenes of Luofu Xianzhou and Xingchahai, we conducted a 15 minute map running test, and the test image quality was set to very high picture quality+60 frame mode. The average frame rate of Huawei Mate60Pro+in 15 minutes was 44.9 frames, and the overall frame rate fluctuated around 50 frames.

To sum up, after the system firmware upgrade and game optimization and adaptation, the performance of Huawei Mate 60 series has been further enhanced, which can fully meet the daily use needs of users, especially the frame rate performance of Genshin Impact.

(8355599)

Disclaimer: The content of this article is sourced from the internet. The copyright of the text, images, and other materials belongs to the original author. The platform reprints the materials for the purpose of conveying more information. The content of the article is for reference and learning only, and should not be used for commercial purposes. If it infringes on your legitimate rights and interests, please contact us promptly and we will handle it as soon as possible! We respect copyright and are committed to protecting it. Thank you for sharing.(Email:[email protected])